Available in Packs of 10 at a Discount Over the Individual Cost.

1/4' (M6) Counterbore for Mounting or Stacking on a 1/4'-20 (M6) Breadboard.

Hold Fiber Optic Cables with Ø900 µm or Ø3 mm Jackets up to 5 m in Length.

Organize Fiber Cables on the Optical Table or Breadboard.

Underside of FSR3 Reel Features Recesses for Adhesive-Backed Magnets (Included) and Indentations for Stacking Multiple Reels This configuration provides both flexibility when restraining cables and compatibility with imperial and metric breadboards. Each polypropylene strap offers a Ø6.5 mm hole on one end and a 31.5 mm long slot on the other, both of which accept 1/4'-20 (M6) cap screws the HW-KIT2 and HW-KIT2/M hardware kits provide 1/4'-20 or M6 cap screws and washers, respectively. The CS1 Cable Straps (supplied in quantities of 15) are designed to confine multiple electrical cables or fiber patch cables to a certain location on an optical table or breadboard. Note that the magnets will not clamp onto aluminum breadboards. The shell is engraved with the part number and offers a small hole for leverage if manual removal is difficult. Two neodymium magnets are mounted in a Ø0.77' (Ø19.5 mm) polystyrene shell. The BM075 Button Magnet Clamps (supplied in quantities of 10) are ideal for securing cables or fibers up to 1/4' (6.4 mm) thick.

CS1 Screw-On Straps for Cable Routing on Optical Tables or Breadboards.

BM075 Magnetic Clamps for Securing Cables, Fibers, and Tubes.

They feature a self-adhesive base for easy installation and flexible nylon construction for durability.īM075 Button Magnet Securing Four Fiber Patch Cables with Ø3 mm Jackets Our PFS01 and PFS02 Self-Adhesive Cable Clips are useful for securing small-diameter electrical cables, as well as fiber optic patch cables. This P-clip base has a clearance hole for 1/4'-20 (M6) screws, allowing them to be affixed directly to the table's surface. The CMS022 P-Clips (supplied in bags of 10) can secure cable looms with diameters up to 19 mm (0.75'). This tie base has a countersunk clearance hole for 1/4'-20 (M6) low-profile cap screws (Item #s SH25LP38 or SH6M10LP), allowing it to be affixed directly to the table's surface. They are designed to be used with the CMS010 Cable Tie Bases (supplied in bags of 250), which allow the cable bundles to be secured on the optical table or work surface. The CMS011 Zip-Tie-Style Cable Ties (supplied in bags of 100) are releasable and are typically used to bundle cable looms.

Cable Clips Assist in Keeping Cables and Fiber Optics Tidy and Secure.

Releasable Cable Ties and Bases, P-Clips, and Nylon Saddle Clips.

Cable management with roller